Solar Pump Controller

Product Details:

Product Details:

• Input Voltage:180 V-480V
• Type: Automatic, Manual
• Usage :Domestic, agriculture
• Digit Display Size: Single Display
• Minimum Order Quantity:1 Piece

Product Description:

We are the prominent manufacturer and supplier of supreme grade Solar Water Pumping Controller. The offered water pumping controller is more reliable and long lasting and  why highly demanded among customers. Our offered water pumping controller is examined by our competent experts on various terms of quality.

Solar Pump Controller:
A variable frequency drive (VFD) is a type of motor controller that drives an electric motor by varying the frequency and voltage of its power supply. The VFD also has the capacity to control ramp-up and ramp-down of the motor during start or stop, respectively.A variable frequency drive can vary the power supplied to match the energy requirement of the driven equipment, and this is how it saves energy or optimizes energy consumption.

Applications:

• Tank filling
• Wildlife farms
• Rural water supply for villages homesteads
• Irrigation systems
• Fountains.

 

Protection:

The SOLAR PUMP CONTROLLER products include diagnostic Features and protection from harmful conditions.

• Short circuit
• Under load
• Overheated controller
• Under voltage
• Dry run
• Locked pump
• Reverse polarity

Additional Information:

• Item Code: AMRUT
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

SOLAR PUMP CONTROLLER

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

A 3 PHASE SOLAR PUMP CONTROLLER is an electronic device that controls the circulating pump in a solar hot water system to harvest as much heat as possible from the solar panels and protect the system from overheating. The basic job of the controller is to turn the circulating pump on when there is heat available in the panels, moving the working fluid through the panels to the heat exchanger at the thermal store. Heat is available whenever the temperature of the solar panel is greater than the temperature of the water in the heat exchanger. Overheat protection is achieved by turning the pump off when the store reaches its maximum temperature and sometimes cooling the store by turning the pump on when the store is hotter than the panels.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

A sSINGLE PHASE SOLAR VFD PUMP DRIVE is an electronic device that controls the circulating pump in a solar hot water system to harvest as much heat as possible from the solar panels and protect the system from overheating. The basic job of the controller is to turn the circulating pump on when there is heat available in the panels, moving the working fluid through the panels to the heat exchanger at the thermal store. Heat is available whenever the temperature of the solar panel is greater than the temperature of the water in the heat exchanger. Overheat protection is achieved by turning the pump off when the store reaches its maximum temperature and sometimes cooling the store by turning the pump on when the store is hotter than the panels.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

A solar controller is an electronic device that controls the circulating pump in a solar hot water system to harvest as much heat as possible from the solar panels and protect the system from overheating. The basic job of the controller is to turn the circulating pump on when there is heat available in the panels, moving the working fluid through the panels to the heat exchanger at the thermal store. Heat is available whenever the temperature of the solar panel is greater than the temperature of the water in the heat exchanger. Overheat protection is achieved by turning the pump off when the store reaches its maximum temperature and sometimes cooling the store by turning the pump on when the store is hotter than the panels.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

MPPT VFD Solar Inverter is an electronic device that controls the circulating pump in a solar hot water system to harvest as much heat as possible from the solar panels and protect the system from overheating. The basic job of the controller is to turn the circulating pump on when there is heat available in the panels, moving the working fluid through the panels to the heat exchanger at the thermal store. Heat is available whenever the temperature of the solar panel is greater than the temperature of the water in the heat exchanger. Overheat protection is achieved by turning the pump off when the store reaches its maximum temperature and sometimes cooling the store by turning the pump on when the store is hotter than the panels.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

A motor controller is a device or group of devices that serves to govern in some predetermined manner the performance of an electric motor. A motor controller might include a manual or automatic means for starting and stopping the motor, selecting forward or reverse rotation, selecting and regulating the speed, regulating or limiting the torque, and protecting against overloads. A solar inverter or PV inverter, is a type of electrical converter which converts the variable direct current (DC) output of a photovoltaic (PV) solar panel into a utility frequency alternating current (AC) that can be fed into a commercial electrical grid or used by a local, off-grid electrical network. It is a critical balance of system (BOS)–component in a photovoltaic system, allowing the use of ordinary AC-powered equipment. Solar power inverters have special functions adapted for use with photovoltaic arrays, including maximum power point tracking and anti-islanding protection.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

A solar ac drive VFD is an electronic device that controls the circulating pump in a solar hot water system to harvest as much heat as possible from the solar panels and protect the system from overheating. The basic job of the controller is to turn the circulating pump on when there is heat available in the panels, moving the working fluid through the panels to the heat exchanger at the thermal store. Heat is available whenever the temperature of the solar panel is greater than the temperature of the water in the heat exchanger. Overheat protection is achieved by turning the pump off when the store reaches its maximum temperature and sometimes cooling the store by turning the pump on when the store is hotter than the panels.
The solar ac drive VFD come up the varity of feuture as below.

Special functions for solar water pumping: To give optimal performance for solar water pumping,Solar AC DRIVE VFD should offer special features for solar water pumps.

a. In-built MPPT tracking algorithm without any need of external card in cabinet. Constant voltage mode (CVT) selection. The function of dormant state at weak light and automatic wake up at strong light. Adjustable delay time for weak light and wake up function. Level control function of high water level dormant state. Under-load pre-warning and protection functions to ensure normal operation of water pumps under changing operating conditions. Facility of connecting grid as well as dc input with pre-programmed changeover between them. RS485 communication facility. Optional panel accessory of data logging through GPRS block.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

A solar AC Pump controller is an electronic device that controls the circulating pump in a solar hot water system to harvest as much heat as possible from the solar panels and protect the system from overheating. The basic job of the controller is to turn the circulating pump on when there is heat available in the panels, moving the working fluid through the panels to the heat exchanger at the thermal store. Heat is available whenever the temperature of the solar panel is greater than the temperature of the water in the heat exchanger. Overheat protection is achieved by turning the pump off when the store reaches its maximum temperature and sometimes cooling the store by turning the pump on when the store is hotter than the panels.

HighlightsThe solar AC pump controller has capacity to run from 0.5 HP to 25 HP.

 

• 0.37 to 45 kW/0.5 to 30 hp
• Operates without grid directly from photovoltaic (PV) cells
• Automatic start and stop with solar radiation
• Built-in maximum power point tracking (MPPT)
• Easy installation and set-up for serial production
• Compatible with all pump types
• Good ROI (Return on Investment) against diesel powered pumping
• Compact and uniform drive module design (IP20)
• Dual supply capability with change over switch - solar and grid compatible
• Sensorless vector control of induction motors and permanent magnet motors
• Safe Torque-off STO SIL3/PL e for emergency stop cat. 0

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

A solar Pump controller is an electronic device that controls the circulating pump in a solar hot water system to harvest as much heat as possible from the solar panels and protect the system from overheating. The basic job of the controller is to turn the circulating pump on when there is heat available in the panels, moving the working fluid through the panels to the heat exchanger at the thermal store. Heat is available whenever the temperature of the solar panel is greater than the temperature of the water in the heat exchanger. Overheat protection is achieved by turning the pump off when the store reaches its maximum temperature and sometimes cooling the store by turning the pump on when the store is hotter than the panels.

We are the prominent manufacturer and supplier of supreme gradeSolar Pump Controller,Three phase Solar AC Pump Controller, Solar pump Inverter,Three Phase Solar Pump Inverter with MPPT and VFD, VFD For Solar Water Pumping, Three Phase Solar Pump Controller, Three Phase Solar Pump Inverter and Solar Powered VFD,Three Phase Solar Pump Controller With MPPT And VFD.

The offered water pumping controller is more reliable and long lasting that why highly demanded among customers. Our offered water pumping controller is examined by our competent experts on various terms of quality. Solar Pump Inverter Array of solar panels connected in series and parallel configuration generates the power and voltage required for the VFD (Variable Frequency Drive) controller to drive the motor. The DC voltage input to the drive converts to variable 3-phase AC voltage and frequency.

Types-

110 V Three Phase Solar Pump Controller,
160 V Three Phase Solar Pump Controller,
415 V Three Phase Solar Pump Controller.

Capacity-

1Hp, 2Hp, 3Hp, 5Hp, 7.5Hp, 10Hp, 15Hp, 20Hp, 25Hp,

Applications

Tank filling, Wildlife & farms,Rural water supply for villages & homesteads,Irrigation systems,Fountains.

 

Protection

The Solar Pump Inverter products include diagnostic Features and protection from harmful conditions.

- Short circuit
- Under load
- Overheated controller
- Under voltage
- Dry run
- Locked pump
- Reverse polarity

Features

 

 

Optimum functionality

Longer service life

Easy installation

Corrosion resistance

High performance

Minimal maintenance

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Solar AC Pump Drive is an electronic device that controls the circulating pump in a solar hot water system to harvest as much heat as possible from the solar panels and protect the system from overheating. The basic job of the controller is to turn the circulating pump on when there is heat available in the panels, moving the working fluid through the panels to the heat exchanger at the thermal store. Heat is available whenever the temperature of the solar panel is greater than the temperature of the water in the heat exchanger. Overheat protection is achieved by turning the pump off when the store reaches its maximum temperature and sometimes cooling the store by turning the pump on when the store is hotter than the panels.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

A solar controller is an electronic device that controls the circulating pump in a solar hot water system to harvest as much heat as possible from the solar panels and protect the system from overheating. The basic job of the controller is to turn the circulating pump on when there is heat available in the panels, moving the working fluid through the panels to the heat exchanger at the thermal store. Heat is available whenever the temperature of the solar panel is greater than the temperature of the water in the heat exchanger. Overheat protection is achieved by turning the pump off when the store reaches its maximum temperature and sometimes cooling the store by turning the pump on when the store is hotter than the panels.

• NO BATTERY
• NO STARTER
• USE EXISTING AC MOTORS
• 20 YEARS LIFE
• 10 YEARS PV WARRANTY
• 2YEARS CONTROLLER WARRANTY .
• ONE TIME INVESTMENT
• AUTO/MANUAL OPERATION
• RANGE: 1HP to 50HP
• This system works at its best during any time of the day at any kind of sunlight. The induction motor has very high starting current which is around four times of the running current of the motor. The VFD in controller eliminates the high starting current of the induction motor. Because of the smooth start using VFD, the motor will start as early as even 9am and works till 5:30pm. It delivers maximum water during 10am to 4pm.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

A SINGLE PHASE SOLAR PUMP CONTROLLER is an electronic device that controls the circulating pump in a solar hot water system to harvest as much heat as possible from the solar panels and protect the system from overheating. The basic job of the controller is to turn the circulating pump on when there is heat available in the panels, moving the working fluid through the panels to the heat exchanger at the thermal store. Heat is available whenever the temperature of the solar panel is greater than the temperature of the water in the heat exchanger. Overheat protection is achieved by turning the pump off when the store reaches its maximum temperature and sometimes cooling the store by turning the pump on when the store is hotter than the panels.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

A SOLAR VFD DRIVE is an electronic device that controls the circulating pump in a solar hot water system to harvest as much heat as possible from the solar panels and protect the system from overheating. The basic job of the controller is to turn the circulating pump on when there is heat available in the panels, moving the working fluid through the panels to the heat exchanger at the thermal store. Heat is available whenever the temperature of the solar panel is greater than the temperature of the water in the heat exchanger. Overheat protection is achieved by turning the pump off when the store reaches its maximum temperature and sometimes cooling the store by turning the pump on when the store is hotter than the panels.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Amrut Energy Pvt Ltd Is the Leading Supplier of the Solar VFD Controller, Solar Pump Controller, Solar Submersible Pump controller and Solar Pump drive.

We Provide Wide Range of Solar Pump Drive.

• 1 HP 230V to 380V
• 2 HP 160V to 380V
• 3 HP 230V to 380V
• 5 HP 380V to 580V
• 7.5 HP 300V to 580V
• 10 HP 580V

We also Provide customise solution for the Solar Pump controller.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)